PRODUCTS
Current Location:Home>Lattice Girder Welding Machine>
Lattice Girder Welding Lines YFE350B
Brief introduction
It adopts five 5mm-12mm rebar of cold rolling ribbed or hot rolling round bar.The production process is steel bar be dragged from raw material device,straightening,bending,welding,forming,cutting and collecting,the end product will be triangle lattice girder.It is mainly used to rebar construction making of high speed railway and truss lattice floor deck.The whole product line can be operated by one people,the fast production speed will be 12m per minutes.
Technical parameter
| No. | Item | Unit | Quantity |
| 1 | The weight of the laying line | kg/coil | 2000 |
| 2 | The number of laying line | Pcs | 5 |
| 3 | Longitudinal wire diameter(upper and lower) | mm | 5-12 |
| 4 | Diagonal wire diameter | mm | 4-7 |
| 5 | Step/Stroke | mm | 190-210 |
| 6 | Girder height | mm | 70-350 |
| 7 | Girder width | mm | 70-110 |
| 8 | Girder length | m | 2-14 |
| 9 | Produce rate | m/min | 12 |
| 10 | Pulling type | mm | Hydraulic clamp traction |